Conductive hose
Gives static somewhere safe to go.
PTFE hose
Carbon-loaded PTFE inner with SS304 braid for fuel, solvent and explosive-atmosphere lines.
Fast-moving, low-conductivity fluids such as fuels and solvents build static against an insulating wall. A carbon-loaded PTFE liner drains that charge to the braid instead of letting it accumulate.
- Construction
- Carbon-loaded PTFE, SS304 braid
- Use
- Fuel, solvent and ATEX-area transfer
- Pressure
- [CONFIRM: ratings vs standard liner]
Configurator
Build your assembly
- ID
- 7.5–8.4 mm
- OD
- 10.4–11.6 mm
- MIN BEND
- 100 mm
- MAX WORKING
- 172 bar
- BURST
- 690 bar
- BRAID
- SS304
−6 · 8 mm nominal · Table ratings apply to smooth-bore SS304 braided hose. · −65 to +260 °C
Quote this assembly in AUDSAE 100R14 dimensions & pressure ratings
Smooth-bore SS304 braided. Bend radius measured at the inside of the bend. Metric size is a label only, per ISO 4397.
| METRIC | DASH | ID MM | OD MM | MAX WP BAR | BURST BAR | MIN BEND MM |
|---|---|---|---|---|---|---|
| 3.2 | −3 | 2.8–3.8 | 5.3–6.8 | 207 | 827 | 38 |
| 5 | −4 | 4.4–5.2 | 7.1–8.2 | 207 | 827 | 51 |
| 6.3 | −5 | 6–6.9 | 8.9–10.1 | 181 | 724 | 76 |
| 8 | −6 | 7.5–8.4 | 10.4–11.6 | 172 | 690 | 100 |
| 10 | −7 | 9.1–10 | 12.2–13.4 | 155 | 621 | 127 |
| 11 | −8 | 9.9–10.9 | 12.9–14.3 | 138 | 552 | 133 |
| 12.5 | −10 | 12.3–13.3 | 15.3–16.8 | 103 | 414 | 165 |
| 16 | −12 | 15.3–16.5 | 18.6–20.1 | 86 | 345 | 197 |
| 19 | −14 | 18.4–19.6 | 21.3–23.3 | 76 | 303 | 229 |
| 22 | −16 | 21.4–23 | 24.6–26.9 | 69 | 276 | 229 |
| 25 | −18 | 24.6–26.2 | 27.8–29.8 | 62 | 248 | 305 |
| 29 | −20 | 27.8–29.4 | 31.9–33.5 | 52 | 207 | 406 |
Australian standards: [CONFIRM: any AS/NZS compliance — none is claimed on aftubes.com].
